Description:
Quadex Quad-Plug is a blend of special cements and admixtures which are designed to instantly stop running water or seepage in all types of concrete and masonry structures

Recommended for:
Sewer Pipes and Manholes
Concrete Tanks
Elevator Pits
Cisterns
Basements
Concrete & Masonry Walls

Features and Benefits:
Stops running water immediately
Non-Shrink, expands as it sets
Contains no calcium chloride
Non-Metallic
Sulfate resistant
Easily applied
No mixing

Typical Performance Data:
Compressive Strength
STRENGTH-PSI (MPa)
(ASTM C109)
            30 Min   1850 psi
            28 Day  5890 psi
Bond Strength
(ASTM C 321)
            30 Min   50 psi
            1 day     85 psi

Packaging:
Quadex Quad-Plug is supplied in 50 lb. (22.7 kg) plastic pail.

Yield:
Quadex Quad-Plug will yield approximately .45 cu. Ft. (787 cu. In.)

Application Information:
TO SEAL RUNNING WATER OR LEAKES:
Prepare crack or hole by chipping out loose material to a minimum depth and width of 3/4” with rubber gloved hand, place a generous amount of dry Quadex Quad-Plug with a smooth fast motion to active leak, maintaining external pressure for 30 seconds. Repeat until leaks stop.

Warranty:
Quadex warrants its products to be free of defects in material and workmanship. Quadex will replace any product proved to be defective when applied in accordance with manufacturer’s instructions. Quadex’s obligation shall be limited solely to such replacement. There are no other warranties by Quadex expressed or implied.

Precautions:
Avoid eye contact or prolonged contact with skin. Wash thoroughly after use. Persons using Quadex Quad-Plug should wear necessary eye protection, dust mask and rubber gloves. Read all product labels and technical literature.